Prodotti

TRAFFIC CONTROL  > TRAFFIC CONTROLLERS> SPC300

VEHICLE OVER SPEED AND PEDESTRIAN TRAFFIC CONTROLLER SPC300

SPC300 Traffic Controller is a competitive apparatus with high performance and reliability realized for Pedestrian Crossing management acting also as deterrent against vehicles over speed. For this special reason the controller can manage moreover the pedestrian pushbutton signal, also two special input dedicated to Radar device capable of detecting over speed vehicles.
The controller can perform the following stages: Normal Condition; Overspeed on side L1; Overspeed on side L2; Pedestrian call or both side Overspeed.
The controller's configuration is realized through a PC using a standard terminal emulator software such as Windows Hyperterminal. Using this software the timing of each stage of the controller could be programmed or read into the controller memory. Cabinet in Material Fiberglass reinforced Polyester (590X320X850 mm).

 

STRUCTURAL CHARACTERISTICS
SPC300 controller is a compact unit made by only one module, on which are mounted:

  • Power supply for logic and for 24Vdc to controller input
  • N° 1 Microprocessor with on board Flash memory
  • N° 1 EEPROM memory for configuration data
  • N° 1 Serial port RS232 type
  • N° 8 Optoisolated input circuits
  • N° 1 Fourteen pin connector for input signal connection
  • N° 11 Terminal point for signal head cable connection

 

CONTROLLER CAPABILITIES
The traffic controller SPC300 has been designed to manage:

  • 3 Phases (9 power outputs) divided in: 2 phases for vehicular sign; 1 phases for pedestrian sign.
  • 8 Digital Input

 

SECURITY
The standard controls mounted on the controller are:

  • Conflict green monitoring
  • Red bulb burnt monitoring
  • Watch dog
  • The occurring of the above said controls, sets the plant in emergency condition (Flashing mode).
     

All rights reserved | Copyright 2012 © SCAE S.p.A. | Via Volta, 6 - 20090 Segrate (MI) - Italy | P.IVA IT00857000152 | info | Elastico Web Agency Milano